Engine is smooth and powerful V-twin design with features for reliability and long life
provides plenty of power and torque. The V-twin air-cooled design is efficient, with smooth, quiet power and easy starts thanks to the electronic ignition.
Many quality features are included – overhead valves for excellent power and fuel economy, and cast-iron sleeves for longer engine life. A replaceable oil filter with pressure lubrication keeps the oil cleaner for long engine life and extended time between oil changes; and when it’s time for a change, there’s easy access to the no-tools oil drain valve for oil changes.
The dual-stage air cleaner thoroughly cleans engine intake air, and a flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer. A rotating screen filters out debris and reduces the size of material that gets through so it will pass harmlessly past the engine fins.
The 48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile
The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility.
The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service. Mower wheels are double-captured, to provide greater strength and durability for longer, trouble-free life. The low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.
The 48A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another.
The 54-in. (138-cm) Accel Deep™ (54A) Mower Deck cuts clean and is versatile
The 54-in. (138-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility.
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut – allowing more power to be used to cut incoming grass, which greatly improves mower capacity.
Cleanliness – for the mower and the operator
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean – there are few places to catch and hold material on top and underneath the deck. The top of deck stays cleaner, reducing time and effort needed for cleaning and service, and there’s less need to clean and remove build-up of material from underside deck. Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities!
The Edge™ Cutting System 62-in. (157-cm) mower deck can take on the biggest mowing jobs
The 62-in. (157-cm) mower is a deep-deck design. The mower can side-discharge or mulch, and the durable plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimise the storage space required.
The deep-deck design does a superior job of lifting grass for a clean, even cut, and the smooth underside of the mower prevents grass buildup and evenly disperses grass clippings. The mower deck is stamped from heavy, 10-gauge, 0.135-in. (3.4-mm) steel for superior durability and long life, and the rolled outer edge of the deck provides extra strength and protection. Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
An optional mulching attachment designed for high performance is available.
Operator station is designed for comfort and convenience
There’s excellent visibility forward and to the trim side of the deck making operation easy and comfortable for the operator, controls are colour coded for easy identification, and the low-fuel warning light is easily visible in daylight.
Serviceability is designed-in for convenience
Accel Deep™ Mower Decks have several features that make them easy to service. The flat-top design minimises places for debris to collect – and spring-loaded, flip-up belt guards make removing debris easy.
Provision is provided for a standard, 3/8-in. (9.5-mm) ratchet wrench to be used for releasing belt tension when removing the drive belt.
Tie-down locations are also provided for convenience and safety when trailering the machine.
Instruments and controls are convenient and easy to use
The motion-control levers can be adjusted to two height settings and nine fore-aft settings for a total of 18 different positions. This provides increased operator comfort and more precise control of the machine.
On-board tracking adjustment from the operator seat is quick and easy – the cut-height pin includes a 13-mm wrench and doubles as a convenient tool for adjusting tracking and the motion-control lever position.
Mower deck lift/cut-height adjustment
The Mower deck cutting height adjusts from 1 in. (2.5 cm) to 4 in. (10.2 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance, and has built-in memory so the operator can easily return to the desired cutting height after raising the deck
Design includes a heavy-duty formed and welded steel frame
ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability.
Large front caster wheels and large rear drive wheels provide several operator benefits: a smoother ride, better slope performance, more operator comfort over uneven ground and better traction
The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use. It’s easy to get on and off the mower, there’s ample legroom for comfortable operation, and colour-coded and logically placed controls.
Reliable electric PTO clutch, durable dual transmissions & axles
A heavy-duty electric power take-off (PTO) clutch is controlled by a convenient, dash-mounted control. The PTO clutch is designed to operate through many on/off cycles.
Dual transmissions efficiently power the ZTrak™ mower forward and reverse and give steering capability. Transmissions are set low in the vehicle for excellent hillside stability, and are reliable and durable.
They feature beefed-up 1-in. (2.5-cm) axles for greater strength, and maintenance-free unitised transmissions are sealed and have no hose connections to leak hydraulic fluid. Tow-valve controls are provided for each transmission and located above the vehicle frame on either side of the engine.